EP · 3.5 tonne · lithium
Genuine 3.5 tonne muscle for steel, stone and heavy pallets.
External 60A charger requires a three-phase supply.
Indicative from-rates, ex GST, based on a 36-month fully maintained term. Final quote subject to site assessment, annual hours, configuration and credit approval. Reviewed August 2026.
KEY SPECIFICATIONS
- Rated capacity
- 3,500 kg
- Mast
- 4.5 m triplex
- Full free lift
- No
- Battery
- 80V / 280Ah lithium (≈22.4 kWh)
- Charger
- 80V/60A external charger
- Site power needed
- Three-phase supply
- Tyres
- Solid tyres
- Attachments
- Side shift, 4-spool valve, LED work + warning lights, OPSS, 1070 mm tynes
Right machine if…
- Steel, stone, paper rolls, moulds, machinery and heavy building products
- Loads that regularly exceed 2.5 t
- Sites with wide aisles and rated floor slabs
Wrong machine if…
- Narrow aisles — turning radius is about 2.5 m
- Mezzanines or ramps not rated for a ~5 t service weight
- Sites without three-phase power
Why sites pick the EFX5-351
- 30 kW lift motor — strong full-load lift speed
- Highest capacity in the fleet
- Shares the EFX5 platform: same charger, same parts, same service
Rated capacity applies at a 500 mm load centre at low height. Residual capacity reduces with lift height, long loads and attachments — we verify the manufacturer load chart against your heaviest pallet and top beam height before recommending any machine.
Questions we get about the EFX5-351
When should I take the 3.5 t over the 2.5 t?
If your heaviest regular load exceeds 2.5 t — or sits close to it on long or offset loads — the 3.5 t gives you genuine headroom for only a small step in weekly rate. Running a 2.5 t machine at its limit every day is a safety and wear problem.
Will my floor handle it?
The EFX5-351 has a service weight around 5 t before the load. We check floor slabs, mezzanines, ramps and dock plates as part of the site assessment before delivery.
How much aisle width does it need?
Turning radius is approximately 2.5 m. As a rule of thumb allow 4 m+ working aisles for pallet work — we confirm this against your racking layout during the fit assessment.
Is the EFX5-351 right for your site?
Send us your loads, lift heights and power supply — we’ll confirm the load chart and quote it the same day.